-
×
Raspberry Pi Zero
1 × ₹2,608.00 -
×
Robotics DIY Kit- 4 Wheel
1 × ₹644.00
Subtotal: ₹3,252.00
Product Carousel Tabs
Controller
Arduino Compatible Nano V3 With USB Cable
Micro-Controller: Atmel ATmega328 SMD Package
Operating Voltage (logic level): 5 V
Input Voltage (recommended): 7-12 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB (of which 2KB used by bootloader)
SRAM: 2 KB
EEPROM: 1 KB
SKU: STEM18002
Controller
Arduino Compatible Mega with USB Cable
Micro-controller: ATmega2560
Operating Voltage: 5V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
USB Host Chip: MAX3421E
SKU: STEM18003
Controller
RASPBERRY PI 3 Model B+
SOC: Broadcom BCM2837B0, ?Cortex-A53 (ARMv8) 64-bit SoC
CPU: 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
RAM: 1GB LPDDR2 SDRAM
WIFI: Dual-band 802.11ac wireless LAN (2.4GHz and 5GHz ) and Bluetooth 4.2
Ethernet: Gigabit Ethernet over USB 2.0 (max 300 Mbps). Power-over-Ethernet support (with separate PoE HAT). Improved PXE network and USB mass-storage booting.
Thermal management: Yes
Video: Yes VideoCore IV 3D
Audio: Yes
USB 2.0: 4 ports
GPIO: 40-pins
Operating system support: Linux and Unix
Extended 40-pins GPIO header
SKU: STEM18004
Controller
Arduino Compatible Nano V3 With USB Cable
Micro-Controller: Atmel ATmega328 SMD Package
Operating Voltage (logic level): 5 V
Input Voltage (recommended): 7-12 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB (of which 2KB used by bootloader)
SRAM: 2 KB
EEPROM: 1 KB
SKU: STEM18002
Controller
Arduino Compatible Mega with USB Cable
Micro-controller: ATmega2560
Operating Voltage: 5V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
USB Host Chip: MAX3421E
SKU: STEM18003
Controller
RASPBERRY PI 3 Model B+
SOC: Broadcom BCM2837B0, ?Cortex-A53 (ARMv8) 64-bit SoC
CPU: 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
RAM: 1GB LPDDR2 SDRAM
WIFI: Dual-band 802.11ac wireless LAN (2.4GHz and 5GHz ) and Bluetooth 4.2
Ethernet: Gigabit Ethernet over USB 2.0 (max 300 Mbps). Power-over-Ethernet support (with separate PoE HAT). Improved PXE network and USB mass-storage booting.
Thermal management: Yes
Video: Yes VideoCore IV 3D
Audio: Yes
USB 2.0: 4 ports
GPIO: 40-pins
Operating system support: Linux and Unix
Extended 40-pins GPIO header
SKU: STEM18004
IOT
Node MCU ( ESP8266)
Open-source, Interactive, Programmable
Wi-Fi Module: ESP-12E module with 6 extra GPIOs
USB: Micro USB port for power, programming and debugging
Headers: 2 x 2.54 mm 15-pin header with access to GPIOs, SPI, UART, ADC and power pins
Drive Type: Dual high-power H-bridge
Flash size: 4 MB
Transfer rate: 110-460800 kbps
Miscellaneous: Reset and flash buttons
SKU: STEM18039
Controller
RASPBERRY PI 3 Model B+
SOC: Broadcom BCM2837B0, ?Cortex-A53 (ARMv8) 64-bit SoC
CPU: 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
RAM: 1GB LPDDR2 SDRAM
WIFI: Dual-band 802.11ac wireless LAN (2.4GHz and 5GHz ) and Bluetooth 4.2
Ethernet: Gigabit Ethernet over USB 2.0 (max 300 Mbps). Power-over-Ethernet support (with separate PoE HAT). Improved PXE network and USB mass-storage booting.
Thermal management: Yes
Video: Yes VideoCore IV 3D
Audio: Yes
USB 2.0: 4 ports
GPIO: 40-pins
Operating system support: Linux and Unix
Extended 40-pins GPIO header
SKU: STEM18004
Controller
Arduino Compatible Mega with USB Cable
Micro-controller: ATmega2560
Operating Voltage: 5V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
USB Host Chip: MAX3421E
SKU: STEM18003
Controller
Arduino Compatible Nano V3 With USB Cable
Micro-Controller: Atmel ATmega328 SMD Package
Operating Voltage (logic level): 5 V
Input Voltage (recommended): 7-12 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB (of which 2KB used by bootloader)
SRAM: 2 KB
EEPROM: 1 KB
SKU: STEM18002
Bestsellers
Recently Viewed
Controller
Arduino Uno DIP R3-Compatible (Without Cable)
Microcontroller: ATmega328P.
Operating Voltage: 5V.
Input Voltage: 7-12V.
Digital I/O Pins: 14 (of which 6 provide PWM output).
Analog Input Pins: 6.
DC Current: 40mA.
Flash Memory: 32 KB.
SRAM: 2 KB.
EEPROM: 1 KB.
Clock Speed: 16 MHz.
SKU: STEM18264
Consumables
ZERO PCB
( FR2 A Grade Material (140 x 90 mm)
ZERO PCB | Buy ZERO PCB Online at affordable price in India | ZERO PCB can be used to build prototypes for bench testing, design early electronic circuits, or produce entire electronic equipment in small quantities. FR2 A Grade Material (140 x 90 mm)
SKU: STEM18262
Consumables
Solar Panel 6V 7x7cm
Solar Panel 7X7 cm | A mini Solar Panel for DIY Project | A mini solar panel Epoxy is made using two-component resin increased to a temperature of 50/60 degrees Celsius. This type of panel is composed of the following layers: Epoxy resin Solar cells PCB board Solar cell sensors are encapsulated in epoxy resin that guarantees protection against.
SKU: STEM18261