Cart
Showing 1–15 of 180 results
-
Battery
10000 MAh 5 volt Power Bank
- Compatible Devices: Tablets and All Other USB Enabled Devices
- PTC Protective Circuits for the Cell
- Output Over voltage Protection
- Temperature Resistance
- Protection from Short Circuit
- Protection from Overcharge and Over-discharge
- Protection from Incorrect Insertion
- Input Over-voltage Protection
- Protection from Output Over current
SKU: STEM18097 -
Motor
12V DC Gear motor(150 rpm)
- The metal gears have better wear and tear properties
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance
- Although motor gives 150 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM and torque
- The shaft has a hole for better coupling
- Rated Torque(kg-cm): 2
- Stall Torque(kg-cm): 7.8
SKU: STEM18101 -
DIY Kits
3D Printer
Fully Enclosed CoreXY Construction with a Print Size of 250*250*250mm Compatible with all Major Filaments Printing Speed Up to 600mm/s 44dB Quiet Print Mode 320. Supporting filaments : PLA, PETG, TPU[1], ABS, ASA
Print speed : 600mm/s (Max.)
Recommended print speed : 300mm/s
Recommended acceleration : 10000mm/s²
Maximum acceleration : 20000mm/s²
Nozzle diameter : Standard 0.4mm, Supports 0.2/0.6/0.8mm expansion
Pressure advance/flow calibration : Supported Camera Monitoring: Built-in 480P camera; video + timelapse
support. Touchscreen Display: 4.3″ capacitive touchscreen, Features: AI Spaghetti detection, AI Error detections, belt-tension monitoring, skip-object detection, dynamic flow & resonance compensation.SKU: STEM18283 -
DIY Kits
3D Printer Advanced
High-Performance 3D Printer
This advanced 3D printer offers lightning-fast printing speeds up to 1000mm/s with 30,000mm/s² acceleration and a 90mm³/s flow rate. It features a 260×260×330 mm build volume, closed chamber, and a 0.4mm brass nozzle supporting temperatures up to 300°C.Equipped with a textured PEI plate (110°C max), real-time monitoring camera, filament detection, vibration compensation, and auto-leveling, it ensures precision and reliability. The 4.3″” color touchscreen, 8GB EMMC + 16GB USB storage, and wide material compatibility (PLA, PETG, TPU, ABS, ASA, PA, PC, etc.) make it versatile for professional and hobby use.
Compatible with FLSUN Slicer and 3rd party software, it supports STL, OBJ, AMF, 3MF formats on both MacOS and Windows.
SKU: STEM18284 -
Display
8×8 LED Matrix Display Module
- Single module can drive a common cathode 8 * 8 dot matrix
- Module Operating voltage: 5 V
- Module size (LxWxH): 5 cm X 3.2 cm? X 1.5 cm
- Holes with four screws , diameter 3 mm, can be fixed by using our M3 studs
- Modules with input and output interfaces, support for cascading multiple modules
SKU: STEM18025
