-20%
Controller
Raspberry Pi 4 Model B (4GB RAM)
- Raspberry Pi 4 Model-B with 4 GB RAM
- RAM Memory 4GB LPDDR4 SDRAM
- 5V 3A DC via GPIO Header
- 5V 3A DC via USB Type-C Connector
- Power Over Ethernet (PoE)?Enabled (requires separate PoE HAT)
Availability:
In stock
₹6,443.00 ₹8,054.00
In stock
Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory and connectivity. The Pi 4 B has significantly faster-wired networking with USB 3.0 technology. The dual-band 2.4GHz and 5GHz wireless LAN enables faster networking with less interference and the new PCB antenna technology allow better reception.
Technical Specifications
- Model: Raspberry Pi 4 Model-B with 4 GB RAM
- Processor: Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- RAM Memory: 4GB LPDDR4 SDRAM
- Connectivity: 2 ? USB 2.0 Ports,2 ? USB 3.0 Ports,2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN,BLE Gigabit Ethernet,Bluetooth 5.0
- Operating Power: 5V 3A DC via GPIO Header,5V 3A DC via USB Type-C Connector,Power Over Ethernet (PoE)?Enabled (requires separate PoE HAT)
- GPIO: (Fully backwar ds-compatible with previous boards)Standard 40-pin GPIO Header
- Multimedia: H.264 (1080p60 decode, 1080p30 encode),H.265 (4Kp60 decode), OpenGL ES, 3.0 Graphics
- Video and Sound: 2 ? micro HDMI ports (up to 4Kp60 supported), 2-Lane MIPI CSI Camera Port, 2-Lane MIPI DSI Display Port, 4-Pole Stereo Audio and Composite Video Port
- Clock Speed: 1.5 GHz
- Micro-SD Card Slot: Yes (FAT32 format), support maximum 32G Micro SD Card Memory Features
- Operating Temperature Range: 0?C to 50?C
- Dimensions (mm) LxWxH: 85 x 56 x 19
- Weight (gm): 52g
Related products
-
Controller
RASPBERRY PI 3 Model B+
- SOC: Broadcom BCM2837B0, ?Cortex-A53 (ARMv8) 64-bit SoC
- CPU: 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
- RAM: 1GB LPDDR2 SDRAM
- WIFI: Dual-band 802.11ac wireless LAN (2.4GHz and 5GHz ) and Bluetooth 4.2
- Ethernet: Gigabit Ethernet over USB 2.0 (max 300 Mbps). Power-over-Ethernet support (with separate PoE HAT). Improved PXE network and USB mass-storage booting.
- Thermal management: Yes
- Video: Yes VideoCore IV 3D
- Audio: Yes
- USB 2.0: 4 ports
- GPIO: 40-pins
- Operating system support: Linux and Unix
- Extended 40-pins GPIO header
SKU: STEM18004 -
Controller
Arduino Mega with USB Cable
- Micro-controller: ATmega2560
- Operating Voltage: 5V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
SKU: STEM18003 -
Controller
Arduino Nano V3 With USB Cable
- Micro-Controller: Atmel ATmega328 SMD Package
- Operating Voltage (logic level): 5 V
- Input Voltage (recommended): 7-12 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (of which 2KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
SKU: STEM18002
